Galvanized Structural Fence Post Anchor Steel Clevis Mounting Base Plate Connector Bracket
These products are customized steel thick heavy metal parts made of Q345 used on the house foundation, bridge, road-highway, etc., a 1.2kw laser cutting machine cuts it. The cutting edge of these parts is very smooth and the tolerance is controlled within 0.05~0.1mm according to the drawing required measure, which is a very high standard in the whole industry.
We offer customized laser-cutting services for steel, copper, aluminum, etc. too The thick can be arranged 1~50mm.
ABOUT US :
BASHIKER is a leading manufacturer of Metal Parts, Metal Bracket, Screw Conveyor Systems, helical pile systems, hydraulically-driven push pier systems, anchoring and earth retention systems, and supplemental crawl space support systems. Founded on the principles of integrity, quality, and service, our mission is to provide the industry with innovative solutions that are appropriately designed and tested, expertly installed, and dependable to perform as promised.
Licensed professional structural and geotechnical engineers design the BASHIKER line of foundation stabilization products. All new construction and retrofit foundation support systems are highly specialized and require a thorough understanding of load paths and interaction with interface materials. BASHIKER'S products are designed under traditional, accepted AISC methods, and then tested to confirm product capacities.
Specification :
Place of Origin
Chifeng, China
Product name
Custom Sheet Metal Parts
Process
Laser Cutting Bending Stamping
Thickness
Customized Thickness
Material Capabilities
Steel/Aluminum/copper/Stainless Steel 316/etc
Quality Control
100% Strict Inspection
Standard
High Precision Non-standard
OEM
Customized OEM Stamping
Advantage
One-stop Solution
General Specifications:
- Material: Likely steel or galvanized steel (indicated by the metallic finish and corrosion-resistant appearance).
- Design:
- Consists of a flat square base plate.
- A vertical stem welded to the center of the base plate.
- Two parallel prongs or lugs at the top of the stem, each with a circular hole.
- Base Plate Dimensions: Approximately square, with a side length that appears to be around 4-6 inches (based on visual estimation), though exact measurements cannot be determined without a scale.
- Stem Height: The vertical stem seems to be about 4-6 inches tall, again an estimate based on the image.
- Hole Diameter: The holes in the prongs appear to be around 0.5-1 inch in diameter, suitable for bolts or pins.
- Welded Construction: The stem is securely welded to the base plate, with visible weld marks.
- Finish: Galvanized or coated finish, suggesting resistance to rust and outdoor use.
- Weight: Likely ranges from 1-3 pounds per unit, depending on material thickness and size (estimated).
- Load Capacity: Not determinable from the image alone, but designed to support moderate loads when anchored (e.g., for securing poles, beams, or equipment).
Potential Use:
- This component could be used as a base anchor for installing poles, posts, or structural supports (e.g., for fencing, signage, or scaffolding).
- The holes in the prongs suggest it can be fastened to another component with bolts or pins, while the base plate can be bolted or embedded into concrete or another surface.
Welcome to contact us for further discussion !!!
){kind=link}